Install Single/Dual DVI capture card Posted by Nick Charalampidis on 08 July 2014 11:23 AM
HowTo: Install Single/Dual DVI capture card.
Driver: Please check the C:\hippotizerv3\thirdparty\Datapath Drivers for correct driver version
Driver Link:Single/Dual DVI Input Card Drivers V03.1.0 Steps: 1) Open the software folder and run the INSTALLER.EXE file. After you have preceded the installation process you will need to Shut Down the machine. (NOTE: select Shut Sown not Restart) 2) After you have rebooted you system open up the Firmware folder and run the Flash133 application. 3) Click the button <SELECT FIRMWARE FILE> when the browser window comes up select <flashimg_Rev34>. When the Firmware update finishes it you will need to Shut Down the machine. (NOTE: select Shut Down not Restart) 4) Switch off the machine and then restart, when in Windows start up Hippotizer Software.