DMX Charts for v3.2.2 Posted by Suzy Casserley on 28 April 2014 01:25 PM
Problem In 3.2.2 the DMX personalitys are the same as in 3.2.1. However it was noticed that one channel on the master was incorrect in the charts and on the personality in 3.2.1
Solution The new charts are below. The only changes to the attached charts from 3.2.1 are channel 56 and 61 were both regionmapper enable, now 61 is region mapper select. Everything else remains as it was in 3.2.1
Hey Ned! Im very new to hippo and ive got a question. I need to control a primary and secondary Hippo V3 via MA-Net. How do I do this? Can you list all the steps to make this possible? I am firing content from an MA2 and need both hippos to fire at the same time. Thanks So Much! In a bit of a emergency so Id appreciate the help ASAP. Thanks!
it should be the same as controlling it with any other lighting desk, you will need to set the IP on the Hippotizer and then plug in the desk, set the desk to output artnet and add the DMX2 component onto the Hippotizer you should then see the values coming in. you can see what is sending by clicking device and then monitor on the DMX2 component, the below videos may also help.